TR Badges

Maker L/11.

# 2477

1 item(s)

Maker 30.

# 2878

1 item(s)

Heer Flak Badge
  $1,285.00

Maker JMME & SOHN Berlin.

# 4402

1 item(s)

Maker French. 

# 3377

1 item(s)

Maker L/18. 

# 3309

1 item(s)

Maker RK. 

# 3346

1 item(s)

Maker Otto Placzek. 

# 3354

1 item(s)

# 3494

1 item(s)

Maker Arno Wallpach.

# 4347

1 item(s)

# 4309

Maker JMME & SOHN, Be.

1 item(s)

# 4310

Maker Unmarked Prob. F.

1 item(s)

# 3406

Maker - Juncker

COA From Mr. Thomas M. Durante:

A nice example of a wartime Close Combat Clasp by the well known C.E. Juncker firm. This is a textbook 1.13.1 variant as shown in the Close Combat Clasp book, with typical mis-spelled maker mark "C.F. Juncker". The barrel hinge and flat-wire catch are correctly recessed into the reverse and neatly soldered in the normal fashion. The clasp has the original blackened backplate, and is characteristically non-magnetic, a unique feature only to be found with Juncker Close Combat Clasps. A nicely example with good amount of original bronze finish remaining. The described and pictured piece is an original example of this award. Size, weight and dimensions are correct to known examples. This documents a lifetime guarantee on the above details and is accurate based on the information available to date.

1 item(s)

Close Combat Clasp
  $385.00

# 2868

Maker- Josef Feix & Sohne - JFS

COA From Mr. Thomas M. Durante:

A nice example of a wartime 2nd Pattern Close Combat Clasp by JFS. This is a textbook 1.12.2 variant as shown in the Close Combat Clasp book, with typical 4-tab crimping around the hinge. The clasp has the original blackened backplate, and is characteristically magnetic along with the hinge, pin and catch. The reverse of the clasp is also appropriately marked with the firm's signature maker mark "JFS" in raised relief next to the hinge and designer's mark adjacent to the catch. A nicely worn example. The described and pictured piece is an original example of this award. Size, weight and dimensions are correct to known examples. This documents a lifetime guarantee on the above details and is accurate based on the information available to date.

1 item(s)

# 3290

Maker- Assmann

1 item(s)

# 1037

Maker- A. D. Schwerdt

Outstanding die struck Panzer Assault Badge from A.D. Schwerdt. Great detail. Slight wear. Most of the silver plating has worn off over the years but everything in solid shape. Hinge is really nice.

1 item(s)

# 2975

1 item(s)

# 2745

1 item(s)

# 2141

Maker- Hermann Wernstein

Classic Panzer Assault Badge from Hermann Wernstein. Typical hinge and catch from this maker. Badge looks like it has spent some time in the ground or moisture as some of the badge material has deteriorated but it still shows superbly.

1 item(s)

Heer Flak Badge
  $785.00

# 3025

Maker- Rudolf Souval - R.S.

1 item(s)

# 3291

1 item(s)

# 3503

1 item(s)

# 1240

Maker- Gebruder Wegerhoff - Ludenscheid

A good late war zinc badge. The badge has the unique hinge and catch common to Gebruder Wegerhoff of Ludenscheid. All parts are in good working order.

1 item(s)

# 2530

Maker- FCL - Franke & Co.

Though missing it's hinge and pin, a nice hard to find FCL badge.

1 item(s)

# 2307

1 item(s)

# 2661

1 item(s)

# 0872

Maker - Hermann Aurich

Good mid-late war badge from Hermann Aurich. Good quality die casting except for some speckling where barrel meets wreath. Slight wear. Some gilt remaining, especially on eagle and right side of wreath. All components in good shape.

1 item(s)

# 3061

Maker- CE Juncker

Exceptionally nice original issue Spanish Cross. Badge is in mint shape except for a period replaced pin. Great centerpiece to someone's collection.

1 item(s)

# 4078

Maker- Friedrich Linden, Ludenscheid - FLL

COA From Mr. Thomas M. Durante:

Unmarked Luftwaffe Pilot/Observer badge, but commonly attributed to the Lüdenscheid-based firm of Friedrich Linden. A mid-wartime example, with the wreath and eagle being made from Zinc. The wreath's gold brennlack finish is largely intact, as well as the silver finish to the eagle. The reverse hardware setup is typical "FLL" production for this timeframe, with a standing block hinge with large-headed hinge-pin. The round wire catch is soldered directly to the zinc wreath; an uncommon feature to find with zinc-based badges but a common production technique attributed to the Friedrich Linden firm. The large, bulbous rivets are also typical of this maker, and appropriately made from zinc to match the base metal of the eagle. Most importantly, they are the correct shape and completely un-messed with. A very nice example that has survived the test of time well. The described and pictured piece is an original example of this award. Size, weight and dimensions are correct to known examples. This documents a lifetime guarantee on the above details and is accurate based on the information available to date.

1 item(s)

Pilots Badge w/case
  $1,385.00

# 3347

Maker- Friedrich Linden, Ludenscheid - FLL

COA From Mr. Thomas M. Durante:

Unmarked Luftwaffe Pilot badge, but commonly attributed to the Ludenscheid-based firm of Friedrich Linden. A mid-to-late war example, with the wreath and eagle being made from Zinc. The eagle was appropriately darkened and was additionally fmished with a protective lacquer that has aged and toned over the years giving it a greenish! yellow appearance. The reverse hardware setup is typical "FLL" production, with a "lazy" block hinge lying on its side, and round-wire catch soldered directly to the zinc wreath; an uncommon feature to find with zinc-based badges but a common production technique attributed to the Friedrich Linden firm. The large, bulbous rivets are also typical of this maker, and appropriately made from zinc to match the base metal Ofthe eagle. The described and pictured piece is an original example of this award. Size, weight and dimensions are correct to known examples. This documents a lifetime guarantee on the above details and is accurate based on the information available to date.

1 item(s)

Pilots Badge w/case
  $1,385.00

# 3352

Maker- Friedrich Linden, Ludenscheid - FLL

COA From Mr. Thomas M. Durante:

Unmarked Luftwaffe Pilot badge, but commonly attributed to the Ludenscheid-based firm of Friedrich Linden. A relatively early example and an uncommon variant, with the wreath and eagle being made from Brass with a thick Silver plating. The badge is nicely worn, revealing the Brass base metal under the silver fmish. As is typical with this maker, the eagle is darkened with an artificial oxidation layer, while the wreath has a frosted silver finish. The reverse hardware setup is also typical, with a "lazy" block hinge lying on its side, and question-mark shaped catch. The large, brass rivets are un-messed with and classic "FLL"-attributed production. A nicely worn example by this maker. The described and pictured piece is an original example of this award. Size, weight and dimensions are correct to known examples. This documents a lifetime guarantee on the above details and is accurate based on the information available to date.

1 item(s)

Pilots Badge
  $1,485.00

# 3357

Maker- Berg & Nolte (B&N L)

COA From Mr. Thomas M. Durante: Coming Soon

1 item(s)

Pilots Badge
  $1,385.00

# 3362

Maker- Berg & Nolte (B&N L)

COA From Mr. Thomas M. Durante:

Luftwaffe Pilot Badge by the Berg & Nolte firm of Ludenscheid. A textbook, early example by this maker with a Nickel Silver wreath and Silver-plated Brass eagle. As is typical with this maker, the eagle is darkened with an artificial oxidation layer, while the wreath has a frosted silver finish. The yellowish/red discoloration on the wreath is the result of aging of the clear protective lacquer that B&NL applied to its badges, and is a feature commonly seen specifically on Luftwaffe badges by this firm. The reverse hardware setup and rivets are also typical of this maker, however the catch has been replaced. Berg & Nolte's maker mark is included on the reverse of the eagle in the normal fashion. ' The described and pictured piece is an original example of this award. Size, weight and dimensions are correct to known examples. This documents a lifetime guarantee on the above details and is accurate based on the information available to date.

1 item(s)

Observer Badge
  $885.00

# 4077

Maker- F. W. Assmann

COA From Mr. Thomas M. Durante:

Luftwaffe Observer Badge by the Assmann & Söhne, Lüdenscheid. A textbook mid-tolate wartime example by this maker with an eagle and wreath made from zinc. The reverse hardware setup is typical of Assmann's later-war, zinc-based production with flattened, "pancake" rivets, small barrel hinge and flat wire catch sitting on a round base plate. The reverse of the eagle harbor's Assmann's characteristic "flat-footed" maker mark. The eagle still retains much of its darkened finish, but appears chalky, typical of later-war "economy" finishes by this maker. The wreath's silver finish has largely dissipated despite the protective lacquer, only remaining on the non-zinc parts of the reverse such as the hinge, pin and catch. A relatively rare badge to find compared with early, nickel-silver Assmann Observers. The described and pictured piece is an original example of this award. Size, weight and dimensions are correct to known examples. This documents a lifetime guarantee on the above details and is accurate based on the information available to date.

1 item(s)

# 3549

Maker- Wilhelm Deumer

COA From Mr. Thomas M. Durante:

Textbook Luftwaffe Radio Operator/Airgunner badge, by the well known Lüdenscheidbased firm of Wilhelm Deumer. A representative mid-to-late war example, the wreath and eagle are both made from zinc, including the rivets which are correctly ovalshaped; characteristic of Deumer's later-war production. The reverse hardware setup is also typical, with a slender block hinge sitting on an oval base plate and thick-wire catch on a circular base plate. The pin, with its flattened spine is also a signature of "Deumer" production. The reverse of the eagle carries the correct, wartime Deumer maker mark. All in all, a nice unmessed with original with nice layer of patina and honest wear. The described and pictured piece is an original example of this award. Size, weight and dimensions are correct to known examples. This documents a lifetime guarantee on the above details and is accurate based on the information available to date.

1 item(s)

# 4076

Maker- Friedrich Linden, Ludenscheid - FLL

COA From Mr. Thomas M. Durante:

Unmarked Luftwaffe Paratrooper badge, but commonly attributed to the Lüdenscheidbased firm of Friedrich Linden. A textbook example of a Type "C" badge as shown in the Luftwaffe Paratrooper Badge book, with a 1st Pattern eagle and 2nd Pattern wreath. Both the wreath and eagle are made from zinc, including the rivets which are characteristically large and bulbous; a signature feature of this maker's Luftwaffe badges. The reverse hardware setup is also typical, with a "lazy" block hinge lying on its side, and thick-wire catch sitting on an oval base plate. The wreath's dark finish is almost completely intact, with minimal wear to the high points. The eagle's gold finish is also mostly intact, but has dulled over time. The described and pictured piece is an original example of this award. Size, weight and dimensions are correct to known examples. This documents a lifetime guarantee on the above details and is accurate based on the information available to date.

1 item(s)

# 3223

Maker- R.S.&S. Richard Simm & Sohne

1 item(s)

# 2500

Maker- GH Osang

Nice piece. Most of the finish is gone with time but looks great. Left leaves very slightly bent.

1 item(s)

Flak Badge
  $435.00

# 3369

Maker- WH

1 item(s)

Flak Badge
  $375.00

# 2415

Maker- F.W. Assmann & Sohne Double Marked with L/64 - Missing hinge & pin

Nice Flak Badge manufactured by F.W. Assmann & Sohne with double marking. Missing hinge & pin but displays very well.

1 item(s)

Flak Badge
  $195.00

# 2976

1 item(s)

Ground Combat Badge
  $395.00

# 3072

Maker- GH Osang

1 item(s)

Ground Combat Badge
  $285.00

# 2072

Very good Luftwaffe Ground Combat Badge. Quite a bit of the original finish and paint remain. The detail is somewhat worn but still extremely nice. Hinge and clip are still in good working order.

1 item(s)

# 1400

Maker- Paul Meybauer - L/13

Good Silver Wound Badge made by Paul Meybauer, Berlin. Detail is great with only slight wear. Back has neat period field repair to retaining clip & looks like they reinforced hinge at the same time. Neat badge with lots of character.

1 item(s)

# 2557

Maker- Klein & Quenzer AG - 65

1 item(s)

# 2877
Maker- Klein & Quenzer AG - 65

1 item(s)

# 3295

Maker - 107 Carl Wild Hamburg

1 item(s)

# 1955

Maker- Klein & Quenzer AG - 65

Silver Wound Badge manufactured by Klein & Quenzer AG of Idar/Oberstein. Hinge & clip in good order. The swastika has been pushed or smashed down. Does not look like a normal De-Nazification. The swastika is still quite pronounced.

1 item(s)

# 2799

Marked on the pin but I cannot make out the mark.

1 item(s)